12V 50W Switch Switching Mode AC/DC Power Supply for LED Lig

Date: 2021-12-29

Product Description

12V 50W Switch Switching Mode AC/DC Power Supply for LED Light/Strip/Lamp/Billboard with CE RoHS S-50-12

Specifications:

Model		HSJ-50-3.3	HSJ-50-5	HSJ-50-12	HSJ-50-15	HSJ-50-24	HSJ-50-36
Output	DC Voltage	3.3V	5V	12V	15V	24V	36V
	Rated Current	15A	10A	4.1A	4.2A	2.1A	1.38A
	Current Range	0~15A	0~10A	0~4.1A	0~4.2A	0~2.1A	0~1.38A
	Rated Power	50W	50W	50W	20W	50W	50W
	Ripple & Noise (max.)	80mVp-p	100mVp-p	120mVp-p	150mVp-p	200mVp-p	300mVp-p
	Voltage Adj. Range	3.1~3.6V	4.7~5.5V	11~13.2V	13.5~16.5V	22.5~26.4V	34.2~39.6V
	Voltage Tolerance	±2.0%	±2.0%	±2.0%	±2.0%	±1.0%	±1.0%
	Line Regulation	±1.0%	±1.0%	±1.0%	±1.0%	±0.5%	±0.5%
	Load Regulation	±5.0%	±5.0%	±5.0%	±5.0%	±5.0%	±5.0%
	Setup,Rise time	60ms,30ms at full load
	Hold Up Time(Typ.)	13ms at full load
Input	Voltage Range	90~264VAC
	Frequency Range	47~63HZ
	Efficiency(Typ.)	75%	79%	82%	84%	86%	87%
	AC Current (Typ.)	5A/115VAC 3A/230VAC
	Inrush Current (Typ.)	20A/115VAC 40A/230VAC
	Leakage Current	<2mA / 240VAC
Protection	Over Load	105~150% rated output power
	Over Load	Protection type: Shut down O/P,recovers automatically
	Over Current	110~200% rated output current
	Over Current	Protection type: Shut down O/P,re-power on to recover
	Short circuit	Protection type: Shut down O/P,recovers automatically after fault removed
Environment	Working Temperature	-20~ 60°C
	Working Humidity	20~90% RH Non-condensing
	Storage temp.& humidity	-20~ 85°C, 10~95%RH
	Temp. coefficient	±0.03%/°C (0~50°C)
	Vibration	10 ~ 500Hz, 3G 10min./1 cycle,60min.each along X,Y,Z axes
Safety & EMC	Safety Standards	CE,RoHS, FCC
	Withstand Voltage	I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
	Isolation Resistance	I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C/ 70% RH
Others	MTBF	10000hrs MIL-HDBK-217F (25°C)
	Dimension	1107835mm (LWH)
	Packing	0.22Kg; 100pcs/23Kg
Note	1. All parameters NOT specially mentioned are measured at 220VAC input, rated load and 25°C of ambient temperature.
	2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 10uf parallel capacitor.
	3. Tolerance: includes set up tolerance, line regulation and load regulation.
	4. Derating may be needed under low input voltages.

Related Seires output power supplies:
12V 50W Switch Switching Mode AC/DC Power Supply for LED Light/Strip/Lamp/Billboard with CE RoHS S-50-12

Pre: 60kv 12kw High Power High Voltage Power Supply
Next: LV Distribution Board (LVDB) -630A Feeder Pillar